CTA One-Man Brake Bleeder - CTA1238
Detail
.auto-style1 { font-family: Arial Helvetica sans-serif; font-size: small; } .auto-style2 { font-family: Arial Helvetica sans-serif; font-size: small; text-decoration: underline; margin-top: 0; margin-bottom: 0; } .auto-style3 { margin-top: 0; margin-bottom: 0; } .auto-style4 { font-family: Arial Helvetica sans-serif; font-size: small; margin-top: 0; margin-bottom: 0; } .auto-style5 { font-family: Arial Helvetica sans-serif; font-size: small; margin-top: 0; margin-bottom: 0; color: #FF0000; } Check valve holds air from going back intocaliper of wheel cylinder when brake pedal is released Removes the need for a helper Comes with 2 ft / 61cm long clear hose with spring clamp DIRECTIONS: Take off the master cylinder coverAdd fresh fluid to the reservoirs. The bleeding sequence is RR LR RF and LF Note: cars with diagonally split duel hydraulic systems (on front wheel drive and some small cars) RR LF and RF is correct Open the bleeder screw of the wheel to be bled Install the black rubber hose end of the tool over it. Place the other end in a jar or can Depress the brake pedal slowly three times See if there are air bubbles in the hose if so continue pumping until they are gone NOTE: Check the fluid level in the master reservoirs frequently during this operation. If they run dry the system will have to be entirely re-bled. Close the bleeder screw remove the tool and bleed the other wheels. Refill the master cylinder reservoirs and re-install the cover Caution: Make sure the pedal is firm before driving.
Category
Vehicle Repair & Specialty Tools